본제품은 AOK 정품 리포알람입니다. 부저내에 마이크로형 LED 가 내장되여있습니다.

- AOK LIPO BATTERY VOLTAGE TESTER LOW VOLTAGE BUZZER ALARM (리튬폴리머 배터리 저전압 경고부져 / 전압 체커기)

- 1셀 - 8셀 사용 가능

-본제품은 업그레이드한 신형 전압체커이며 더욱센서테브하게 되였고 2.7V~3.8V 체커범위가 확대였습니다.

-1ST 버전 보다 사운드가 더욱 크게 들립니다.

-차량주행시 리포배터리에 연결하시고 3.4V 볼트설정하시고 주행하시길바랍니다.(매번주행시 설정필요)

3.3V 설정권장합니다.(고출력배터리는 당기자마다 울리는현상있으면 3.3V로 설정바랍니다)

AOK 5in1 User Manual
Function
 1Cell~8Cell Lithium battery pack voltage test.
 Lithium battery low voltage sound and light alarm.（Low alarm value can be set）
 Digital temperature Meter.（Temperature value user self calibration）
 Digital temperature over temperature alarm.（Temperature alarm value can be set）
 Can control the rapid discharge of the lithium battery pack.
 RGB LED display battery voltage status.
 Two high (110dB) buzzer sound alarm.
 0.36 INCH RED super high brightness LED digital display screen.
 The input and output ports are equipped with anti reverse protection circuit.
※ This product can not be independent of the use of high power Discharge mode,
need to cooperate with the AOK high power bulb discharge module use.
（Please cooperate with 50W or 150W discharge module）

Product Connection Diagram

Product Use and Display
1. After the product power is connected, the digital tube display full screen display, the firmware
self check hardware. showing that the total voltage of the battery 8cE,Display 8cell for the
detection of access to the battery for the ALL. Show the total voltage of 33.6 for the detection
of access to the battery is 33.6V。Display No.1 1# Cell Battery，Display 4.19 for the detection
of the voltage of the 1# 4.19V。Product will be based on the access to the battery Cell number
can only show:No.1,4.19....No.8,4.20。Hi-8 indicates that the 8# is the highest，4.20 voltage for
the highest voltage 8#.Lo1 indicates that the 1# is the lowest, 4.19 voltage for the lowest
voltage 1#. H-L indicates that the battery pack is the highest cell voltage minus the minimum
cell voltage,0.01 for the voltage difference 0.01V.