The Tamiya King Hauler is a scale tractor Tamiya truck with a realistic ladder frame and a 3-speed gearbox. The suspension is equipped with solid axles with leaf springs just like full scale trucks.

Tamiya Truck 3Speed Shifting

Tamiya Truck, Semi trucks and Highlifts use 3speed transmissions for more maneuverability and true scale realism. Whether you’re hauling a big load or climbing some rough terrain, the ability to shift into low gear can make the difference. High speed runs are no problem once you kick it into 3rd gear, when its time to move out!

The Tamiya Truck requires a 4 channel stick type radio for full function. If you’re going to outfit your vehicle with one of our multifunction units (MFU), you will need to choose a analog radio. Shifting into gear is extremely easy once your transmission is adjusted correctly.

Below you will see the basic concept on how the servo moves the transmission into all three gears. It is best to get the transmission adjusted with your trims centered and only using the collar on the transmission rod to adjust final increments. This will allow for the best operation if you’re using a MFU unit.

Make sure to use loctite on the grub screw in the collar to prevent having to readjust the transmission again. Taking a little extra time to set the transmission up will provide you with better performance and less adjustments down the road.



아래이미지는 참고용입니다

사진에보이는 옵션은 포함되어있지않습니다

The Tamiya Truck Specifications

• Scale: 1/14
• Length: 23.62 inches (600mm)
• Width: 7.20 inches (183mm)
• Wheelbase: 17.60 inches (447mm)
• Front Tread: 6.14 inches (156mm)
• Rear Tread: 5.43 inches (138mm)
• Weight: 6.17 lbs. (2800g)
• Chassis: Aluminum ladder
• Suspension: Solid Axle
• Damper Type: Metal friction
• Drive Train: Gearbox (3-speed)
• Gear Ratio: 10.6:1 – With the 3-speed gearbox, 10.6:1, 17.7:1 and 32.4:1 are possible
• Differential Type: Bevel Gear
• Engine: Electric 540
• Wheels & Tires: Chrome/Radial
• Body Type: Styrene(plastic)
• Radio Control Unit: (not included) Can be operated with a 2-channel radio but a 4-channel system is recommended for potential future options.
• Battery: Requires a 7.2V battery and charger